networking multi-part question and need the explanation and answer to help me learn.
Please answer the following questions.
Requirements: as required
NET 365
Homework #3
You should create a separate Homework #3 Answers document and type your answers into that document. When you are finished, convert your Answers document to PDF and submit on D2L for Homework #3.
(5 points) What is a Standard ACL? Why should Standard ACLs be placed as close to the destination as possible?
(5 points) What is an Extended ACL? Why should Extended ACLs be placed as close to the source as possible?
(5 points) Describe 3 data fields that are stored in the BGP Table.
Below is shown a portion of the BGP Table in router X. This router has discovered three different paths to destination network 150.88.0.0/16 in AS 1605. For each path, the BGP Table shows the Next Hop address for the next BGP router along this path towards that destination network, as well as 4 Path Attributes, which are “Metric”, “Local Preference”, “Weight” and “AS Path”.
(5 points) Do BGP routers advertise Weight attribute values to other BGP routers? If so, which BGP routers?
(5 points) Given the values shown, which one of these three routes will router X select to copy into its routing table for destination 150.88.0.0/16? Why?
(5 points) Suppose the route you chose in answer (b) goes down, then which of the remaining two routes will router X select to copy into its routing table for destination 150.88.0.0/16? Why?
(10 points) Consider the Standard ACL 10 defined in slide #15 of the “Access Control Lists” handout in Week 8 Content (with 4 ACEs). What is the result (either Deny or Permit) of executing this ACL on a packet with each of the following source addresses: a) 192.128.10.1
192.168.20.1
192.168.10.2
192.168.10.1
182.168.10.1
Assume Subnet A = 53.19.2.48/28, Subnet B = 11.5.11.0/24, Host #1 IP = 53.19.2.55. Host #2 IP = 11.5.11.29. You want to define an ACL named HW3-ACL that does all of the following:
NET 365 HW 3 1
Deny all IP packets from Host #1 to Host #2.
Permit TCP packets with destination port 23 from any other source IP in subnet A (that is, any subnet A IP that is not Host #1) to Host #2.
Deny any other TCP packets from any source IP to any Subnet B destination IP.
Permit any other IP packets.
(5 points) What are the specific Cisco IOS commands that you would enter to define this named Access Control List (ACL)?
(5 points) What Cisco IOS command would you use to apply the ACL you defined in part (a) to all incoming packets on interface Se0/0/1?
NET 365 HW 3 2
We are a professional custom writing website. If you have searched a question and bumped into our website just know you are in the right place to get help in your coursework.
Yes. We have posted over our previous orders to display our experience. Since we have done this question before, we can also do it for you. To make sure we do it perfectly, please fill our Order Form. Filling the order form correctly will assist our team in referencing, specifications and future communication.
1. Click on the “Place order tab at the top menu or “Order Now” icon at the bottom and a new page will appear with an order form to be filled.
2. Fill in your paper’s requirements in the "PAPER INFORMATION" section and click “PRICE CALCULATION” at the bottom to calculate your order price.
3. Fill in your paper’s academic level, deadline and the required number of pages from the drop-down menus.
4. Click “FINAL STEP” to enter your registration details and get an account with us for record keeping and then, click on “PROCEED TO CHECKOUT” at the bottom of the page.
5. From there, the payment sections will show, follow the guided payment process and your order will be available for our writing team to work on it.
Need this assignment or any other paper?
Click here and claim 25% off
Discount code SAVE25